ATWP2-10 Dual-Column Swivel-Leg Mobile Aluminum Platform: Safety Flagship for 10m High-Altitude Heavy-Duty Operations

Dual-Column Reinforced Structure: Industrial-Grade Balance of 12m Working Height and 200kg Load Capacity

The ATWP2-10 adopts a military-grade 6061-T6 aluminum alloy dual mast structure, achieving a maximum platform height of 10m and a working height of 12m through symmetric mechanical design. With a 200kg rated load, it easily carries a single operator plus heavy tools such as welding machines and hydraulic wrenches. The 1.5m × 0.67m non-slip platform is equipped with a three-layer folding tool rack and a magnetic part tray, adapting to multi-tool collaborative operations. Its 10cm-high edge toe guard prevents material falling.

With folded dimensions of 1.70m × 0.76m × 1.99m, it can pass through 0.8m-wide industrial passages and standard freight elevators (car ≥ 1.8m × 1.2m). When deployed, its 2.4m × 2.2m swivel-leg support forms an equilateral trapezoidal stable base. At 10m height, platform vibration amplitude is ≤ 10mm, meeting stringent heavy-industry high-altitude operation standards.

Dual-Power Intelligent Adaptation: Full-Scenario Coverage from Continuous Operations to Field Work

Industrial-Grade AC System (Standard):

A 1.5kW permanent magnet synchronous motor supports 220V/110V wide voltage input, with a lifting speed of 0.6m/s. Equipped with vector frequency conversion technology, it reduces energy consumption by 15% under 200kg load, and motor temperature rise is ≤ 50℃ after 12 hours of continuous operation. Built-in intelligent load sensors monitor platform weight in real time; when overloaded by 10% (220kg), it automatically restricts lifting and issues warnings—ideal for high-frequency heavy-duty scenarios such as factory production line maintenance and warehouse high-level shelf upkeep.

DC Extended-Range Version (Optional):

Dual 12V/100Ah maintenance-free lithium battery packs paired with a 2.2kW DC motor enable 60 lifting cycles on a single charge (approximately 7 hours of operation). A 12V/15A fast charger (80% charge in 3 hours) is included. The Battery Management System (BMS) displays remaining power and health status in real time, supporting operation in a wide temperature range (-10℃ to 50℃). It adapts to off-grid environments such as wind turbine tower maintenance and mountain communication base station upkeep, with a cable-free design eliminating site restrictions.

Swivel-Leg Efficient Deployment: Flexible Operation with 800kg Weight

Tool-Free Deployment in 90 Seconds:

The patented hydraulic-assisted swivel-leg mechanism, adjusted via single-handle linkage, allows one person to lock the support leg angle in 90 seconds—saving 50% deployment time compared to traditional plug-in leg structures. With a support range of 2.4m × 2.2m, it requires only 1.5㎡ of floor space in narrow areas (e.g., workshop equipment gaps, stairwells). Four 12-inch heavy-duty casters with electromagnetic brakes ensure that the 800kg total weight (AC model) offers a pushing resistance of ≤ 40N on flat ground, providing better relocation convenience than same-class heavy-duty equipment.

Precision Control System:

The platform handrail integrates a 4.3-inch LCD touchscreen, displaying key parameters in real time (height accuracy ±20mm, tilt angle, battery level, etc.) and supporting stepless speed regulation (0.2-0.6m/s). The folding safety gate features mechanical + electronic dual locks; the system locks lifting functions when the gate is unclosed, and manual unlocking is required after closing. Combined with 1.2m-high non-slip guardrails, it creates a 360° three-dimensional protective space, meeting the needs of precision operations such as pipeline welding and curtain wall installation.

Seven Safety Protection Devices: Full-Process Guarantee for Heavy-Duty Operations

Anti-misoperation buttons: Adopt double-key interlock design; both "power + lift" buttons must be pressed simultaneously to start, avoiding hazards from single-key misoperation.

Platform self-locking gate: Automatically cuts off lifting power when the gate opens >15°; manual unlocking is required after closing to prevent accidental opening during operation.

Level indicator: Built-in high-precision tilt sensor triggers sound-light alarm and disables lifting when tilt angle >3°, ensuring working surface level error <0.5°.

Emergency descent system: Dual backup (mechanical manual pump + hydraulic emergency valve) allows one person to lower the platform to the ground within 30 seconds during power failure or malfunction, applicable to all height ranges.

Emergency stop button: IP67 waterproof emergency stop keys on both ground and platform control panels cut off all power output within 0.2 seconds, responding to emergencies.

Standard forklift pockets: 180mm×100mm embedded bottom interfaces are compatible with international standard forklifts; swivel legs fully retract during transportation to avoid collisions with protruding parts.

Oil pipe explosion-proof system: Hydraulic pipelines use double-layer steel wire braided explosion-proof pipes with built-in rupture valves, locking cylinders within 0.1 seconds during sudden bursts to prevent platform drops.

Industry-Wide Heavy-Duty Applications: From Core Industrial Scenarios to Special Engineering

Heavy industry in-depth maintenance: 12m working height adapts to large equipment crane beam inspection and high-altitude pipeline replacement in steelmaking workshops. With 200kg load capacity for full sets of flaw detection instruments, the dual-column structure improves stability by 40% compared to single-column equipment under full load.

Commercial complex renovation: Its narrow design fits into shopping mall passenger elevators; 10m platform height meets atrium steel structure hoisting and glass dome installation needs. The widened platform allows operators to carry building materials (e.g., ceiling keels), reducing up-and-down trips.

Outdoor engineering operations: The DC version adapts to highway overpass bearing maintenance and wind turbine blade root bolt tightening. Its 2.4m × 2.2m support range maintains stability on slopes ≤5°, with ground pressure ≤0.3MPa.

Municipal infrastructure maintenance: Compatible with street lamp maintenance basket quick-connect interfaces, supporting 12m high-altitude cable welding and traffic signal replacement. The motor’s IP55 protection rating enables short-term operation in moderate rain, expanding application boundaries.

Technical Value Proposition

Positioned as the "10m High-Altitude Heavy-Duty Safety Expert," the ATWP2-10 redefines performance standards for 200kg-class mobile platforms through its dual-column reinforced structure, intelligent dual-power system, and seven safety devices. Equipped with a 1.5kW AC power system and full safety devices (with optional DC battery packs), it precisely matches search needs such as "dual-column swivel-leg platform 10m" and "high-altitude heavy-duty equipment," providing efficient and safe high-altitude operation solutions for industrial, commercial, and municipal fields.