4m Dual-Mast Aluminum Aerial Lift (ATWY04-2): Stable 24V Battery-Powered for Low-Height Tasks

When your work stays at 4 meters—like installing 4m restaurant ceiling fans, fixing hotel lobby light fixtures, or maintaining factory equipment at low heights—most lifts either lack stability for precise work or feel too bulky for tight spaces. The ATWY04-2 changes this: a dual-mast aluminum lift with 150kg capacity, 24V battery power, and a compact design that prioritizes stability without sacrificing maneuverability.

4m Reach, but Built for Stable Precision

4 meters would possibly appear low, however steadiness nonetheless matters—especially for duties like aligning mild fixtures or portray straight edges. Unlike wobbly single-mast lifts, this dual-mast diagram spreads weight evenly throughout two aluminum columns, slicing platform sway through 50% in contrast to single-mast models. Even at full 4m top with 150kg, the platform shifts much less than 2mm, making it perfect for element work like wiring 4m wall sconces or mounting signage.

Its 1.336×0.91m footprint suits via 1m-wide doorways and squeezes between restaurant tables or lodge foyer furniture. At 980kg, it’s mild ample for one man or woman to cross with the handle, but heavy sufficient to remain regular at some stage in duties that require leaning—like accomplishing throughout a 4m wall to contact up paint.

0.65×0.9m Platform: More Space for Tools, Less Clutter

Most 4m lifts skimp on platform size, forcing you to balance tools on your lap. This one’s 0.65×0.9m platform adds 38% more space than standard 0.65×0.65m models—enough for a 10kg toolbox, a 5kg paint tray, and a 20kg step stool (for reaching edge corners) without feeling cramped. Built-in chains and safety guards keep items from sliding, while two side hooks let you hang 8kg of supplies like extension cords or cleaning cloths.

For a restaurant maintenance team, this means loading once to fix 4m ceiling tiles, replace light bulbs, and clean air vents—no need to lower the platform mid-job to grab forgotten tools.

Dual-Mast Durability: Tough Enough for Daily Use

What makes it both stable and long-lasting? High-strength aluminum masts paired with a Q235 steel base (thickened to 6mm) that resists dents from forklift transport or accidental bumps. The dual columns are reinforced at the joints, so even after 500+ lifts, they won’t flex or creak.

This toughness shines in busy settings. Roll it over a hotel’s uneven marble floor? The steel base absorbs shocks, keeping the platform steady. Nudge it against a factory wall while fixing a 4m pipe? The aluminum masts won’t scratch or bend—ready for tomorrow’s tasks.

24V Battery Power: Cordless Convenience for Indoor Zones

No more trailing cords through crowded lobbies or restaurants. The 24V battery lasts 6 hours of non-stop use—enough to provider 30 resort rooms’ 4m fixtures or paint 15 restaurant booths. Recharging in a single day offers it a full a hundred percent with the aid of morning, and the low-battery indicator prevents mid-task shutdowns.

The battery additionally maintains noise low: a tender hum that won’t disturb lodge company at some stage in sunlight hours renovation or restaurant diners all through top hours. Perfect for spaces where quiet matters as much as precision.

Easy to Operate: One Person, Total Control

You don’t need training to master this lift. The handle controls both lifting and movement—stand on the platform, grip the lever, and glide to the next spot without stepping down. A lower control panel lets ground staff raise/lower the platform for you, saving time during handoffs.

Need to stop suddenly? The emergency descent valve works even if the battery dies, lowering you smoothly to the ground in 15 seconds—faster than most 4m lifts, which take 20+ seconds.

Where It Excels: Low-Height Tasks That Need Care

This lift is built for 4m jobs that demand stability and space:

Restaurants: Install 4m ceiling fans or paint crown molding, with enough platform space for supplies.

Hotels: Fix 4m lobby chandeliers or clean high windows, without scratching marble floors (thanks to mark-free tires).

Factories: Maintain 4m machinery panels or replace overhead lighting, with dual-mast stability for leaning into tasks.

Museums: Adjust 4m exhibit lighting, with quiet operation to avoid disturbing visitors.

The ATWY04-2 proves 4m lifts don’t have to be flimsy or cramped. Its dual-mast design, roomy platform, and 24V battery make low-height work feel controlled and efficient—whether you’re touching up paint in a restaurant or aligning fixtures in a hotel. Finally, a lift that’s as steady as your work needs to be.