6m Dual-Mast Aluminum Aerial Lift (ATWY06-2): Steadfast 24V Battery-Powered for Mid-Height Precision

When your work hits 6 meters—like hanging 6m theater curtains, fixing convention center ceiling panels, or maintaining museum exhibits at mid-heights—most lifts force a trade: single-mast models wobble at 6m, while large lifts are too clunky for tight spaces. The ATWY06-2 solves this: a dual-mast aluminum lift with 150kg capacity, 24V battery power, and a design that balances 6m reach with steadiness no single-mast lift can match.

6m Reach, Backed by Dual-Mast Steadiness

6 meters isn’t “low,” but this lift doesn’t treat it like an afterthought. Unlike single-mast lifts that sway pretty at 6m, its twin aluminum columns distribute weight evenly, slicing platform motion by means of 60%—critical for duties like aligning 6m signage or portray straight edges. Even with 150kg (a employee + 30kg of tools), the platform shifts much less than 3mm at full height, making it secure for refined jobs like putting in theater lighting.

Its 1.336×0.91m footprint stays compact sufficient to slide via 1m-wide theater doors, squeeze between conference core booths, or tuck into museum showcase aisles. At 1100kg, it’s heavy enough to feel planted during 6m work, yet light enough for one person to maneuver with the handle—no team needed to reposition.

0.65×0.9m Spacious Platform: Tools Stay Organized, Not Cluttered

Most 6m lifts skimp on platform size, turning mid-height work into a balancing act. This one’s 0.65×0.9m platform adds 35% more space than standard 0.65×0.65m models—enough for a 15kg tool bag, a 10kg paint sprayer, and a 20kg folding ladder (for edge work) without feeling cramped. Built-in chains and safety rails keep gear from sliding, while two side hooks let you hang 12kg of supplies like extension cords or cleaning kits.

For a theater crew, this means loading once to adjust 6m stage lights, fix curtain tracks, and touch up ceiling paint—no lowering the platform mid-shift to grab forgotten tools.

Dual-Mast Durability: Tough Enough for Daily 6m Use

What makes it steady and long-lasting? High-strength aluminum masts (thicker than single-mast designs) paired with a 6mm-thick Q235 steel base that shrugs off bumps from forklifts or busy crowds. The dual columns are reinforced at the 3m and 6m joints—spots where single-mast lifts often weaken—so even after 800+ lifts, they won’t flex or creak.

This toughness shines in high-traffic spaces. Roll it through a bustling convention center? The steel base absorbs jolts from uneven floors, keeping the platform steady. Nudge it against a theater wall while reaching 6m? The aluminum masts won’t scratch or bend—ready for tomorrow’s show setup.

24V Battery Power: Cordless Freedom for Mid-Height Zones

No more tripping over cords in crowded venues. The 24V battery lasts 5 hours of continuous use—enough to service 25 theater seats’ overhead lights, hang 10 convention center banners, or clean 15 museum display cases. Recharge overnight, and it’s ready for morning setup—no need to hunt for outlets in busy lobbies.

The battery also keeps noise low: a soft hum that won’t disrupt theater rehearsals or museum tours. Perfect for spaces where “quiet operation” matters as much as reach.

Easy to Operate: One Person, Total Control

You don’t need training to master 6m work. The handle controls both lifting and movement—stand on the platform, grip the lever, and glide to the next 6m spot without stepping down. A lower control panel lets ground crews raise/lower the platform for you, saving time during quick venue turnarounds.

Need to stop suddenly? The emergency descent valve works even if the battery dies, lowering you smoothly to the ground in 18 seconds—faster than most 6m lifts, which take 25+ seconds.

Where It Shines: 6m Tasks That Demand Steadiness

This lift is built for mid-height jobs that need both reach and precision:

Theaters: Adjust 6m stage lights or hang curtains, with dual-mast steadiness for alignment.

Convention centers: Install 6m booth signage or fix ceiling panels, compact enough to navigate crowds.

Museums: Maintain 6m exhibit lighting, with mark-free tires that won’t scratch polished floors.

Hotels: Repair 6m lobby chandeliers, quiet enough for guest areas.

The ATWY06-2 proves 6m lifts don’t have to choose between “tall enough” and “steady enough.” Its dual-mast design, spacious platform, and 24V battery make mid-height work feel controlled and efficient—whether you’re setting up a convention or prepping a theater show. Finally, a lift that matches 6m work’s demands.