While high-altitude work above 15 meters still relies on large-scale equipment, the BJSP1414AC-A AC-driven scissor liftis reshaping industry perceptions with its "small yet sophisticated" breakthrough. Boasting a working height of 15.8 meters, a rated load capacity of 300 kg, paired with an overall length of 2.82 meters and width of 1.40 meters, this equipment achieves a "triple balance" of height, load, and flexibility in mid-to-high altitude operations. It provides a more efficient, compact solution for scenarios such as factory maintenance, bridge repair, and municipal engineering.

The "Load-Height" Golden Ratio for Mid-to-High Altitude Work

In aerial work equipment, the notion that "taller means bulkier" seems to hold true—but the BJSP1414AC-A defies this norm. Its maximum platform height of 13.8 meters, combined with an average 2-meter human working height, creates an effective operating range of 15.8 meters, sufficient to cover mid-to-high altitude needs such as installation of roof trusses in large workshops and exterior wall construction of buildings under 10 floors. More critically, its 300 kg rated load easily accommodates 2 workers plus full sets of tools (1 worker when using the extended platform, with a 120 kg load capacity). The 0.9-meter platform extension also covers edge work areas, solving the traditional pain point of aerial equipment that "can reach but can’t carry."

Its compact size is another standout feature: a 1.40-meter width allows passage through most industrial corridors and freight elevators; a 2.82-meter length enables easy turning in narrow spaces; and a folded guardrail height of 2.11 meters facilitates stacked storage in warehouses. This "tall yet not bulky" design frees mid-to-high altitude work from the site constraints of large equipment.

"Adaptability Revolution" for Complex Scenarios: Mastering All Conditions from Slopes to Rainy Days

Tailored to the complex environments often encountered in mid-to-high altitude work, the BJSP1414AC-A’s technical configurations are highly targeted. While its maximum climbing capacity of 25% is slightly lower than that of similar high-altitude equipment, its stable electronic control system precisely handles common terrains such as factory slopes and outdoor gentle inclines. By real-time monitoring the body’s tilt angle and dynamically adjusting power output to left and right wheels, the system prevents slipping or tipping during climbing—making it particularly suitable for uneven sites like municipal road sides and factory ramps.

Equipped with an IP67 waterproof rating, the equipment "takes on" rainy weather and humid workshops fearlessly. Its fully sealed electrical system and drive components resist short-term water immersion, ensuring stable operation of core parts even during rainy-season outdoor work or maintenance in aquatic product workshops. This breaks the traditional limitation of aerial equipment being "afraid of water and moisture."

Green Endurance and "Worry-Free" Maintenance: Reducing Lifecycle Costs

As a battery-powered device, the BJSP1414AC-A is equipped with 4 12V 150Ah batteries, enabling zero-emission operation—aligning with the low-carbon requirements of eco-friendly factories and municipal projects. A stowed driving speed of 3.2 km/h and lifting/lowering efficiency of 70 seconds (up) and 65 seconds (down) ensure quick on-site transfers while minimizing non-operational time, with a single charge supporting 8 hours of continuous work.

The maintenance-free design further "lightens the load" for users: from drive motors to wiring layouts, high-wear-resistant materials and optimized sealing technology significantly reduce the frequency of regular inspections required for traditional equipment. The specially designed steering mechanism, through trajectory optimization, reduces tire wear during turns by 30%, further cutting maintenance costs and allowing the equipment to focus on work itself.

Multi-Scenario Adaptability: A "Versatile Hand" from Medium Factories to Outdoor Projects

In industrial settings, its 15.8-meter height covers maintenance of crane rails and installation of ceiling pipelines in medium factories. In municipal fields, its compact size suits street lamp repair in urban green belts and inspection of viaduct edges. In warehousing and logistics, its 300 kg load capacity meets the needs of organizing heavy goods on high racks. With an overall weight of 3,500 kg, it ensures stability while remaining transportable via ordinary trailers, enabling rapid deployment for cross-site operations.

The stable electronic control system remains a safety backbone: a maximum allowable working angle of 1.5°/3°, combined with real-time rollover warnings, builds a double safety barrier for aerial workers. This combination of "safety + efficiency + environmental friendliness" makes the BJSP1414AC-A a "new efficiency paradigm" in mid-to-high altitude work.

From its 15.8-meter working height to IP67 all-weather adaptability, from 300 kg load capacity to low-cost maintenance-free operation, the BJSP1414AC-A AC-driven scissor lift is positioning itself as a targeted, compact solution for mid-to-high altitude work. It proves that mid-to-high altitude operations don’t have to compromise on equipment size—efficiency and flexibility can coexist.