Antmac 2.6-ton diesel forklift product advantages

2.6 tons is the "golden tonnage" between the standard 2.5 tons and 3 tons, retaining the flexibility of small to medium tonnage while possessing near-heavy-duty power reserves. The following is a summary of the product advantages of this unique tonnage, which can be directly used on the product details page.

I. Power and Performance Advantages – Precisely Matching the “Overload Threshold”

1. Gold's energy reserves

① Equipped with a reinforced 2.6-ton dedicated powertrain , the rated power is 8% higher than that of the 2.5-ton model, and the torque output is more abundant ;

② Optimized for “semi-heavy load” conditions: When the load fluctuates between 2.5 and 2.8 tons, the engine still maintains the optimal fuel economy zone ;

③ With a maximum gradeability of 22% , it can easily pass through warehouse ramps and loading/unloading platforms when fully loaded .

2. Exceeding the load-bearing capacity of its class

① Compared to the 2.5-ton model, the 2.6-ton design has an 8% overload safety margin , making it more capable of handling sudden overloads ;

② The lifting speed is increased by 12%, and the full-load lifting speed can reach 380mm/s , making the operation cycle more efficient ;

③ Optimize torque output for "frequent start-stop" scenarios to reduce shift jerking and extend transmission life .

3. Value of Differentiated Positioning

"It's not a simple upgrade of 2.5 tons, but a precise solution tailored for customers who 'often approach full load and occasionally need to exceed it slightly.'"

II. Advantages in handling and agility – A “Hercules” in a Small Size

1. Compact body, high tonnage off-road capability

① The turning radius is controlled within 2050mm , which is on par with mainstream 2.5-ton models, making it easy to enter and exit narrow passages ;

② The minimum aisle width is only 2650mm , which is compatible with most standard shelving layouts ;

③ The wheelbase has been optimized to 1500mm , balancing stability under a 2.6-ton load with steering agility .

2. Precise micro-motion control

① The hydraulic system has been upgraded to dual-pump confluence technology , improving micro-motion control precision by 20% ;

② The fork descent speed can be infinitely adjusted from 0-200mm/s to meet the requirements of precision stacking ;

③ An optional proportional valve control system can be installed to achieve millimeter-level fork positioning .

3. Comparative advantages become apparent

III. Safety and Reliability Advantages – Born for “Critical Operating Conditions”

1. Reinforced structural design

① The key parts of the chassis are made of 6mm thick steel plates , which is 20% thicker than the 2.5-ton model ;

② The gantry guide rails undergo high-frequency quenching treatment , achieving a hardness of HRC45-50 and improving wear resistance by 35% ;

③ Standard configuration includes a cast axle , which has a 40% higher load-bearing capacity than a stamped axle .

2. Triple overload protection system

① First level of warning : Load sensor monitors in real time, with audible and visual alarms when overloaded by 90% ;

② Second level of power restriction : Overload will automatically cut off the lifting power, but the driving function will be retained ;

③ Third layer of protection : The hydraulic system has a built-in safety relief valve that automatically releases peak pressure .

3. Extreme operating condition verification

① It passed a 1000-hour continuous full-load durability test without any structural failures ;

② It maintains stable performance within a temperature range of -20℃ to 45℃ ;

③ An optional fully enclosed dustproof cab is available , suitable for high-dust environments such as cement plants and flour mills .

IV. Maintenance and Durability Advantages – Reduced “Critical Load” Losses

1. Targeted Enhancement of Maintenance

① The drive shaft adopts a reinforced universal joint , extending the maintenance cycle to 500 hours ;

② The braking system has been upgraded to an oil-immersed multi-disc brake with a lifespan of over 3,000 hours ;

③ The filter adopts a larger capacity design , extending the replacement cycle by 30% compared to the 2.5-ton filter .

2. Modular and easy-to-maintain design

① The engine compartment uses a side-opening large cover , which requires no tools for routine inspection ;

② The hydraulic pipeline is centrally located, and key joints are externally located, reducing maintenance time by 40% ;

③ Standardized component design, with 80% of parts being interchangeable with 2.5-3 ton models, making procurement convenient .

3. Cost advantages throughout the entire life cycle

五、Multi-scenario adaptability advantage – filling the "tonnage vacuum"

1. Customization options

① Fork length customization: 1070mm standard / 1200mm extended are available ;

②Mast height customization: 3 meters/4.5 meters/6 meters (three options) ;

③ Customized cab: Fully enclosed with heating/semi-enclosed/no cab ;

④ Attachment interfaces are reserved: side shifters, paper roll clips, and push-pull devices are ready to use .

2. Precisely targeted application scenarios

3. Terrain-adaptive configuration

①Indoor working conditions : Polyurethane tires are optional to protect the epoxy flooring from leaving marks ;

②Outdoor paving : Standard configuration includes pneumatic tires with excellent shock absorption performance ;

③ Complex road surfaces : Off-road tread tires with a tread depth of 18mm are available .