When aerial work climbs past 9 meters—like installing lighting in 10-meter warehouses, repairing factory ceilings, or maintaining high-rise racking—you need a lift that reaches higher and stays reliable. The BJSP1012-Aself-propelled hydraulic  scissor lifts steps in here: with an 11.8-meter working height, 320kg load capacity, and a battery built for all-day use, it turns "too high" into "right where you need to be."

11.8M Reach: No More "Almost There" for High Spaces

Most mid-sized scissor lifts top out around 10 meters, leaving a gap for jobs that need just a bit more height. The BJSP1012-A closes that gap with 11.8 meters of working height (9.8 meters platform height)—enough to reach the top of 10-meter warehouse racks, 11-meter factory ceilings, or the upper levels of event venues.

It doesn’t sacrifice capacity for height, either. The 320kg main platform handles 2 workers with tools, while the 0.9-meter extended platform (120kg capacity) lets one person reach edge areas—perfect for tasks like fixing ceiling corners or adjusting high shelving. No more stretching, no more "can we get a taller lift?" delays.

240Ah Batteries: Runs All Day, Charges Fast

High-rise work often means longer time at height, which drains batteries fast. The BJSP1012-A avoids mid-shift recharges with a 24V DC system powered by 4×6V 240Ah batteries—larger than standard 225Ah setups. This means more cycles: you can lift, lower, and move between spots all day without hunting for a charger.

When it does need power, its industry-trusted charger gets the job done quickly—so even if you run it hard one day, it’s ready to go the next. No more "waiting for the battery" slowing down morning start times.

Steady on the Job, Even with Daily Use

High height and heavy use (like 10+ lifts a day) put extra stress on a lift’s frame. But the BJSP1012-A’s fork structure is tested to 100,000 fatigue cycles—that’s like lifting and lowering 30 times a day for 9 years.It doesn’t simply "work" once; it works consistently, whether or not you’re the usage of it in a busy warehouse or a busy development yard.

The optimized platform provides small however crucial touches: non-slip floor that stays grippy even with dust, and bolstered edges that face up to dents from dropped tools. These aren’t simply "features"—they’re why it doesn’t begin squeaking or shaking after a few months of use.

Maneuverable Enough for Indoors, Tough Enough for Slopes

At 2.45m lengthy and 1.18m wide, it matches via industrial doorways and between warehouse racks—no want to rearrange your house to make room. And while it’s built for height, it doesn’t shy away from uneven ground: 25% gradeability lets it handle ramps or sloped yards, and its 1.5°/3° working angle keeps the platform steady when you’re up high.

It moves smart, too: 3.2km/h in stowed mode to zip between work zones, and a slow, steady 0.8km/h when raised—so you can nudge into position without jostling tools or materials.

Who Needs This Lift?

It’s made for jobs where "high" is non-negotiable:

10-meter+ warehouses: Reaching the top racks to stock or repair.

Large factories: Fixing ceiling ducts, lighting, or machinery that sits high.

Logistics hubs: Maintaining tall conveyor systems or overhead signage.

Industrial facilities: Carrying 320kg of tools (like welders or heavy drills) up to 11.8 meters.

The BJSP1012-A doesn’t just reach higher—it stays reliable while doing it. For teams tired of lifts that max out at 9 meters, or that die mid-shift, it’s the kind of workhorse that turns high-rise headaches into just another part of the day.